Products

Summary

Defi-Link Meter ADVANCE FD is a display of 2.5-inch full-color TFT which needs to be connected to ADVACE Control Unit SE / ADVANCE Control Unit(discontinued).

Launching: August, 2022

We recommend using this product with the ADVANCE Control Unit Sensor Package, which includes the ADVANCE Control Unit SE and sensors.

*Defi-Link ADVANCE Control Unit/SE (sold separately) is necessary to operate FD.

*Defi-Link Meter ADVANCE FD is expressed as ADVANCE FD or FD.

Adopts a 2.5-inch full-color TFT for motorcycles that can withstand strong sunlight.

Uses low-reflection glass inherited from ADVANCE A1 that maximizes the visibility of color TFTs.
By connecting this product to the ADVANCE system, the illumination of ADVANCE gauges is controlled automatically.
Comes with a separate switch that can be attached to either the left or right.
Equipped with a seamless sequential indicator that looks like a single line when not lit. When lit, you can see the boundary one by one.

Display items can be set optionally and maximum 6 items can be displayed all together on one display.
Boost pressure can be displayed in both bar and digital.
Odometer and trip meter can be displayed.
The mounting stay inherits the previous model ZD.

*In this image, the mounting stay and a optional part (sold separately) fitting kit DF09501 are used together.

Display items		Display range	Format
Speed		0 ～ 399km/h（0 ～ 239MPH）	numeral
Tachometer		0 ～ 11,000rpm	numeral/bar
OP1	Turbo/Boost/ Intake manifold press.*	-100 ～ 300kPa (-29.5inHg ～ 45.0PSI)	numeral/bar
OP2	Oil Press.*	0 ～ 1,000kPa（0 ～ 145PSI）	numeral
OP3	Fuel Press.*	0 ～ 600kPa（0 ～ 87PSI）	numeral
OP4	Oil Temp.*	0 ～ 150℃（32 ～ 302°F）	numeral
OP5	Water Temp.*	0 ～ 150℃（32 ～ 302°F）	numeral
OP6	Exhaust temp.*	0 ～ 1,100℃（32 ～ 2,012°F）	numeral
Differential press.*		0 ～ 1,000kPa（0 ～ 145PSI）	numeral
Volt		10 ～ 16V	numeral
Odo		0 ～ 999,999km（0 ～ 599,999mile）	numeral
Trip		0.0 ～ 9999.9km (0.0 ～ 9999.9mile)	numeral
Idling		00:00 ～ 99:99	numeral

To display the items marked with *, sensors and sensor wires need to be installed.

The product of Defi-Link ADVANCE SYSTEM cannot be connected with the product of Defi-Link SYSTEM. It is not compatible with the product of Defi-Link SYSTEM. Sensors are common in ADVANCE system and Defi-Link System except turbo sensor, but sensor wires are not common.
Defi-Link ADVANCE Control Unit/SE and sensor sets (sensors and sensor wires) which are sold separately are necessary to operate ADVANCE FD.
Be sure to check the compatibility of your vehicle with the product before purchasing. Defi does not have information about cars sold outside Japan. Contact your local car dealer or Defi official distributor for your area for compatibility.

Please refer to the manual for the detail.

Power supply voltage	10V～16V DC（For 12V vehicle）
Current consumption of ADVANCE Control unit (Maximum value obtained when connecting 7 gauges and displays)	+B line: 2A(IGN ON), 1mA（IGN OFF） ILM line: 5mA
Operation temperature range	-20 ～ +60℃, -4 ～ +140°F（Under 80% relative humidity）
Storage temperature range	-30 ～ +80℃ , -22 ～ +176°F（Under 80% relative humidity）
Applicable speed pulse	2/4/8/16pulse (mainly for Japanese vehicles) Pulse free setting: 1,274 ～ 16,562pulse/km, 2,051 ～ 26,665pulse/mile（corresponds to 2 ～ 26pulse）
Applicable number of cylinders	1･2･3･4･5･6･8（4cycle）
Dimensions	Refer to part names and dimensions section.

The following images are examples of a display configuration. The display configuration can be set as desired.

Turbo/boost and engine speed can be displayed in horizontal bars.

FD has functions such as:

Warning display
Peak value display
Differential pressure display between fuel pressure and intake manifold pressure
Warm-up mode for guarding engine.
Error display of disconnection and short circuit
Shift-up sequential indicator with 8 LEDs
Master warning function
Odometer and trip meter display, and so on.

Please refer to the manual for the detail.

ADVANCE Indicator is sold separately.

Start guide and a warranty card are included with the parts listed above.