Launching: June, 2016
Additional models launching: January, 2020
Defi-Link Meter ADVANCE A1 is a series of gauges which need to be connected to ADVACE Control Unit SE / ADVANCE Control Unit(discontinued).
ADVANCE A1 is a series of premium models which contains a metallic tone dial plate with convex scales. It also provides a high visibility by using a low-reflection glass.
The numbers are not visible until the ignition is turned on.
*Defi-Link ADVANCE Control Unit/SE (sold separately) is necessary to operate A1 gauges.
*Defi-Link Meter ADVANCE A1 is expressed as ADVANCE A1 or A1 gauges.
*The illumination would be automatedly turned ON/OFF by connecting to ADVANCE ZD.
| Power supply voltage |
Supplied from Defi-Link ADVANCE Control Unit |
|---|---|
| Current consumption | Maximum during 7 gauges are connected +B 2A(IGN ON), 5mA(IGN OFF) ILM 800mA |
| Illumination color | White The illumination color cannot be changed. Pointer: red Warning LED: red Peak LED: blue |
| Display range | Refer to lineup. |
| Applicable number of cylinders | 1,2,3,4,5,6,8 |
| Note |
*Products is for only on vehicles with a 12V electrical system. Never use products on 24V vehicles. *Products can not be installed in altered vehicles. *To install pressure gauges or temperature gauges, proper sensor attachments are necessary. The thread sizes of sensors are 1/8PT. *Refer to manual for parts inlucded. |
Regarding Turbo 200kPa and water temperature, there are also packages without sensors for ADVANCE CAN Driver which is an unit to display ISO-CAN data from OBDII on gauges.
-100kPa to +300kPa
-100kPa to +20kPa
0kPa to 1000kPa
0kPa to 600kPa
50 to 150 degrees C
20 to 120 degrees C
w/o sensor: DF15302
200 to 1100 degrees C
0 to 9000RPM
0 to 9000RPM
0 to 11000RPM
