Specifications
Size
Other specifications
| Power supply voltage |
10V to 16V DC (for 12V vehicles) |
| ADVANCE Control unit Current consumption |
+B line: 2A (IGN ON), 5mA (IGN OFF) ILM line: 800mA (Maximum value obtained when connecting 7 gauges and ZDs) |
| Display color Illumination color |
OLED: amber Sequential indicator LED: red |
| Dot size | 64 x 128 |
| Applicable speed pulse |
2, 4, 8, 16pulse(mainly for Japanese vehicles) Pulse free setting: 1,274 to 16,562pulse/km, 2,051 to 26,665pulse/mile(corresponds to 2 to 26pulse) |
| Applicable number of cylinders |
1, 2, 3, 4, 5, 6, 8 (4cycle) |
| Note | *Products is for only on vehicles with a 12V electrical system. Never use products on 24V vehicles. *Products can not be installed in altered vehicles. *To install pressure gauges or temperature gauges, proper sensor attachments are necessary. The thread sizes of sensors are 1/8PT. |
Display range
| Speed | 0 to 400km/h（0 to 240MPH) | |
| Tachometer | 0 to 11,000rpm | |
| OP1※ | Oil Pressure (OP1*) | 0 to 1,000kPa（0 to 145PSI) |
| OP2※ | Fuel Pressure (OP2*) |
0 to 600kPa（0 to 87PSI) |
| OP3※ | Oil Temperature (OP3*) |
0 to 150 deg C （32 to 302 deg F) |
| OP4※ | Water Temperature (OP4*) |
0 to 150 deg C（32 to 302 deg F) |
| OP5※ | Exhaust temperature (OP5*) |
0 to 1,100 deg C（32 to 2,010 deg F) |
| Volt | 10 to 16V | |
| Clock | 12 hours display | |
- *To display OP1 through OP5 in Display range, the sensor sets OP1 through OP5 need to be purchased separately. (Ex. To display Oil pressure, AD Oil pressure sensor set OP1 needs to be purchased separately.) However, the ADVANCE CR or the ADVANCE BF is already installed, the sensor set is not necessary to be purchased separately.
- *ADVANCE ZD cannot display turbo or intake manifold pressure.