Before install this product, please read "Safety Warning,"
"Regarding Product Handling," and "Before Installation"
thoroughly.
*Use the cylinder number select switch at the back of
the control unit to set the number of cylinders that matches
your engine.
How
to install Tachometer
1.
Cut the double
sided tape as shown in figure 1.
2.
Insert convex part
of the mounting bracket over the legs of the meter case.
Attach the mounting bracket to the meter case with the
nuts and bolts included with the kit fixed as shown in
figure 2.
3.
Attach one piece
of double sided tape and the buffer on the meter as shown
in figure 3.
4.
Pass the meter
wiring through hole on the meter cup and connect it to
the gauge.
5.
Place the gauge
in the meter cup making sure that wiring is not sandwiched.
6.
Attach double sided
tape on the back of the mounting bracket. Bend the mounting
bracket to conform to the structure of the location where
you in tend to attach it. To avoid it falling off, use
tapping bolts available from hardware stores to permanently
attach the mounting bracket.
Use appropriate dashboard cleaning liquids available from hardware
stores to clean the area where the double sided tape will be
attached.
End
of Life Products |
How
to install Tachometer
