|
|
| TROUBLE SHOOTING |
If operation of the product seems unusual, inspect the product to
confirm that it is not malfunctioning. If an operational problem has
occurred, it could result in an accident.
In addition to a general inspection of the product, use the following
table to confirm proper operation of the unit.
|
CONDITION
|
| *Does not display. |
|
POSSIBLE CAUSE
|
| *Wiring is improper. |
|
REMEDY
|
| *Check wiring as per instructions in Defi-Link Control Unit
II or Defi-Link Control Unit operations manual. |
|
CONDITION
|
| *Triple Warning Mode cannot be set. |
|
POSSIBLE CAUSE
|
| *Display is connected to Meter Output2
of Defi-Link Control Unit II. |
|
REMEDY
|
| *Connect Display to Meter Output1 of Defi-Link Control Unit
II. |
|
CONDITION
|
| *Cannot adjust illumination of display. |
|
POSSIBLE CAUSE
|
| *Display is connected to Meter Output1 of Defi-Link Control
Unit II. |
|
REMEDY
|
| *Connect Display to Meter Output2 of Defi-Link Control Unit
II. |
|
CONDITION
|
*A line does not light in the display.
*A button does not operate.
*A dot that should not light is lighting. |
|
POSSIBLE CAUSE
|
| *Defi-Link Display is damaged. |
|
REMEDY
|
| *Contact the retail outlet where the unit was purchased. |
|
CONDITION
|
| *Speed is not being recorded. |
|
POSSIBLE CAUSE
|
| *The REC button of Defi-Link Control Unit II or REC/PLAY
button of Defi-Link Control Unit has been pressed while the
vehicle is stopped. |
|
REMEDY
|
| *This is normal for the product. Press REC button or REC/PLAY
button while the vehicle is moving. |
|
|
|
|
End
of Life Products |
