|
|
| SAFETY WARNING |
This display is a valuable additional meter for providing information
to automobile users about engine conditions and other important factors.
When installing and operating this product, be sure to read the cautionary
items of this operations manual as well as those given in the operations
manual for the vehicle in which this display will be installed. Obtain
a full understanding of the cautionary items and use the product accordingly.
In this manual, the degree of hazard arising from actions such as
improper operation is separated into the 2 levels "Warning"
and "Caution". In addition, instructions that must be followed
for safe and proper use of this product as well as practices that
must be maintained are marked with a "Confirmation" heading.
Please read and become familiar with these sections.
In the event that this product (or the vehicle in which it is installed)
is lent to or transferred to another person, please be sure this operations
manual accompanies the product.
|
|
|
| BEFORE INSTALLATION |
 |
 |
Be sure to follow all instructions in this manual
to ensure safe installation and operation of the product. |
|
Carefully consider the installation location and
driver's operation of the product before installation. Be sure
not to install the unit where it could fall. Improper installation
or operation could cause the product to fall and damage the
vehicle or present the severe danger of impeding driving of
the vehicle. |
|
Do not disassemble or modify this product. Such
actions can not only damage or destroy the product but will
also void the warranty. |
|
Ensure that the vehicle will remain stationary
and turn off the engine before installing this product. Failure
to do so could result in a fire, and could make the vehicle
move during installation. |
|
Do not perform installation of this product immediately
after the engine has been switched off. The engine and exhaust
system are extremely hot at this time and can cause burns if
touched. |
|
Remove the key from the ignition and disconnect
the negative (-) battery terminal prior to installation of this
product. Failure to do so could result in a fire caused by an
electrical short circuit. |
|
Take care not to install this product in a way
that interferes with safety equipment such as seat belts and
airbag systems or vehicle operation equipment such as engine
controls, steering wheel or brake systems. Avoid modifying the
wires and wiring connections (installation screws) of these
systems. Interference with normal operation of the vehicle can
result in an accident or fire. |
|
Ensure that the wiring of this product does not
have an adverse impact on the other wiring of the vehicle. The
controller or other electronic components of the vehicle could
be damaged. |
|
Use a solderless connector or similar device for
wiring connections and make sure connections are insulated.
In areas where there could be tension or sudden impacts on the
wiring, safeguard the wiring with corrugated tubing or other
shock absorbent material. Accidental shorts can cause fires. |
|
Please keep children and infants away from the
installation area. Children may swallow small parts or be injured
in other ways. |
 |
|
This product is designed for use on 12V vehicles.
Do not install this product on vehicles with 24V systems. |
|
Do not install the display in a location with
much moisture or dust, or where it will be in direct sunlight,
or in an area around heater exhaust vents. |
|
Wear gloves to avoid burns when soldering and
cuts when working with wiring. |
|
When the negative (-) battery terminal is disconnected,
equipment such as clocks and audio components having internal
memory may lose their memory data. Follow the operations manual
of each component to reset data after installation of this product. |
 |
|
After installation is complete, return this
operations manual to the customer along with the warranty. |
|
| REGARDING PRODUCT HANDLING |
|
|
|
|
|
End
of Life Products |
