| REPLAY Display, PEAK Display | |||||||||||||||||||||||
| This screen records vehicle data for meters connected to Defi-Link
Control Unit II or Defi-Link Control Unit or it replays the recorded
data or displays data peaks. * Does not display data for Turbo Meter or Tachometer. |
|||||||||||||||||||||||
| 1. When connected to Defi-Link Control Unit II | |||||||||||||||||||||||
| Care must be used in operation because Defi-Link Control Unit II operation differs from Defi-Link Display; Defi-Link Display determines if it should record/play according to vehicles running/stopped condition. | |||||||||||||||||||||||
|
|||||||||||||||||||||||
| REC(Recording) | |||||||||||||||||||||||
| Pressing the Control Unit II REC button in either Gauge Mode, Speed
Mode or Triple Warning Mode will start recording of all data for meters
connected to Control Unit II and speed data for a maximum of 3 minutes.
When 3 minutes elapses, the unit will return to the mode used before
recording started. To stop recording before the 3 minute maximum elapses, press the REC button again, and the unit will return to the mode used before recording started. Speed can be recorded during vehicle running by pressing the REC button. |
|||||||||||||||||||||||
 |
|||||||||||||||||||||||
| PLAY | |||||||||||||||||||||||
| start playing of all recorded meter data or speed data for a maximum
of 3 minutes. When playing is completed, or when the PLAY button is
pressed again, the unit will return to the mode used before playing
started. * If PAUSE is pressed during playback, the time counter display will disappear. Speed can be played by pressing the PLAY button when the vehicle is stopped. If PAUSE is pressed during speed playback, the unit will return to Real Mode. |
|||||||||||||||||||||||
 |
|||||||||||||||||||||||
| PEAK Display | |||||||||||||||||||||||
| Pressing the Control Unit II PEAK button in either Gauge Mode, Speed
Mode or Triple Warning Mode will display recorded peak values from
all meter data or speed data. Pressing the PEAK button again will return the unit to the mode used before peak display started. Pressing the UP button of Control Unit II while a peak value is displayed will reset the peak value. |
|||||||||||||||||||||||
 |
|||||||||||||||||||||||
| 2. When connected to Defi-Link Control Unit | |||||||||||||||||||||||
| Care must be used in operation because Defi-Link Control Unit operation differs from Defi-Link Display; Defi-Link Display determines if it should record/play according to vehicles running/stopped condition. | |||||||||||||||||||||||
|
|||||||||||||||||||||||
| REC(Recording) | |||||||||||||||||||||||
| Pressing the Control Unit REC/PLAY button in either Gauge Mode,
Speed Mode or Triple Warning Mode will start recording of all data
for meters connected to Control Unit and speed data for a maximum
of 40 seconds. When 40 seconds elapses, the unit will return to the
mode used before recording started. To stop recording before the 40 second maximum elapses, press the REC/PLAY button again, and the unit will return to the mode used before recording started. Speed can be recorded during vehicle running by pressing the REC/PLAY button. * Recording of speed data will be interrupted if wiring disconnection or short circuit occurs during recording. * The unit cannot record while the vehicle is stopped even if the REC/PLAY button is pressed. |
|||||||||||||||||||||||
 |
|||||||||||||||||||||||
| PLAY | |||||||||||||||||||||||
| After recording, pressing the Control Unit REC/PLAY button when
PEAK values are being displayed will start playing of all recorded
meter data or speed data for a maximum of 40 seconds. When playing
is completed, or when the REC/PLAY button is pressed again, the unit
will return to the mode used before playing started. Speed can be played by pressing the REC/PLAY button while in PEAK Mode when the vehicle is stopped. If PAUSE is pressed during speed playback, the unit will return to Real Mode. * Recording of speed data will be interrupted if wiring disconnection or short circuit occurred during recording. * The unit cannot play while the vehicle is running even if the REC/PLAY button is pressed. |
|||||||||||||||||||||||
| *If
PAUSE is pressed during playback, the time counter display will disappear. |
|||||||||||||||||||||||
| PEAK Display | |||||||||||||||||||||||
| Pressing the Control Unit PEAK/RESET button in either Gauge Mode,
Speed Mode or Triple Warning Mode will display recorded peak values
from all meter data or speed data. Pressing the PEAK/RESET button again will return the unit to the mode used before peak display started. Pressing the Control Unit PEAK/RESET button for 2 seconds while a peak value is displayed will reset the peak value. |
|||||||||||||||||||||||
|
|
|||||||||||||||||||||||
 CLOSE |
(Record)