Once the ignition key is turned on, gauges come
into operation after the needle pointers of three gauges move
sequentially (opening mode).
Once the ignition key is turned off, gauge operations
stop after the needle pointers of three gauges move sequentially
(closing mode).
ILLUMINATION
The gauge dials and needle pointers light up
being interlocked with switching on and off of the illumination
of the vehicle.
The illumination of the gauge dials and needle
pointers lights up during the opening and closing modes without
reference to the illumination of the vehicle.
CHECK FUNCTIONS
Wire disconnections and short circuits of sensors and
sensor wires can be checked by movement of pointers. If the pointers
move as follows after installation of the product, please contact
the installation personnel.
Wire
disconnection check
This function reports the wrong wiring and/or disconnected sensors
and wires. The pointer of a gauge which the wire is disconnected
moves between 250 and 260 degrees at the same interval as follows:
The movement indicates the angle of pointers.
All the pointers of three meters do not move simultaneously.
Short
circuit check
This function reports the short circuits of sensors and wires.
The pointer of a gauge which has a short circuit moves between 10
and 20 degrees at the same interval as follows:
The movement indicates the angle of pointers.
All the pointers of three meters do not move simultaneously.
End
of Life Products |
Warnings
for Safety Handling
