Defi Homepage
Home Club Defi Products Lineup Parts List Catalog Japanese Site
Contact Information Shops List Overseas Distributors
PRODUCTS
Defi-Link VSD X Defi-Link Meter BF Defi-Link Display Defi-Link Control Unit II  
Racer Gauge BF Tachometer Meter Hood & Option DIN-Gauge  
 
End of Life Products | Defi-Link Meter | VSD BASIS | VSD CONCEPT |
Defi-Link Meter
PRODUCT FEATURES
SPECIFICATIONS
AVAILABLE TYPE OF GAUGES
SAFETY WARNING
PARTS LIST
HOW TO INSTALL
HOW TO OPERATE
TROUBLE SHOOTING

SPECIFICATIONS
D-Gauge

SIZE in inches(mm)

Power supply
voltage
DC10 to 15V(Exclusive for 12V vehicle)
Current
consumption
Illumination ON: Max. 0.2A
Illumination OFF: Max. 0.1A
Operating Temperature -4to +140, -20 to +60 (humidity below 80%)
Storage Temperature -40 to +176, -40 to +80(humidity below 80%)
Display Range Boost -30inHg to +35PSI
Oil Press 0 to +145PSI
Fuel Press 0 to +115PSI
Temp +86 oF to +300 oF
Exhaust Temp +400 oF to +2,000 oF
Air/Fuel Ratio 17 to 10
Gross Weight(lb) Boost 1
Oil Press 4/5
Fuel Press 9/10
Temp 3/4
Exhaust Temp 9/10
Air/Fuel Ratio 3/5
NOTE

*This product is for only on vehicles with a 12V electrical system. Never use this product on 24V vehicles.
*Products can not be installed in altered vehicles.
*Gauges can be mounted in dash panel or mounting panel. Dash panel or mounting panel thickness should be less than 1/2inch(12mm). Fasten with the bracket and nuts supplied.
*To install pressure gauges or temperature gauges, proper sensor attachments are necessary. The thread sizes of sensors differ depending on products. Refer to "PARTS LIST" and "HOW TO INSTALL."


D-Gauge Tachometer
SIZE in inches(mm)

Power supply
voltage
DC10 to 15V(Exclusive for 12V vehicle)
Current
consumption
Illumination ON: Max. 0.2A
Illumination OFF: Max. 0.1A
Operating Temperature -20 to +60 , -4to +140 (humidity below 80%)
Storage Temperature -40 to +80 , -40 to +176 (humidity below 80%)
Display Range 0 to 11,000 r/min
Supported No. of cylinders 3, 4, 5. 6 and 8 cylinders (4 cycle petrol vehicles)
Gross Weight 2lb(870g)
NOTE *This product is for only on vehicles with a 12V electrical system. Never use this product on 24V vehicles.
*This product can not be installed in diesel vehicles.
*This product can not be installed in vehicles without a engine revolution signal.
*Products can not be installed in altered vehicles.