|
FUNCTIONS
|
Functions listed below with "#"
marks are available when the Defi-Link Display VSD CONCEPT is connected
to Defi-Link Control Unit II (or Defi-Link Control Unit) and sensors
are connected.
|
 Digital
and bar display |
|
 Folloring
information is displayed in Digital and bar display.
|
Display contents
|
Digital display
|
Bar display
|
| Speed |
|
|
| Engine speed |
|
|
| Oil pressure # |
|
|
| Fuel pressure # |
|
|
| Oil temperature # |
|
|
| Water temperature # |
|
|
| Exhaust temperature # |
|
|
 AVAILABLE |
 NOT
AVAILABLE |
 Data
on turbo or boost cannot be displayed.
|
| Warning
display (LED and digital display) # |
Warning values can be set discretionary. Double warning
of engine speed is also settable by equipping two LED indicators.
|
| Record
and Replay # |
Connected sensor data and speed data can be recorded
for a maximum of 3 minutes. The data can be replayed later.
|
| Auto
Warning # |
When a non-displayed value exceeds the set value, the
display changes from selected data to the current warning value automatically.
|
| Opening/Ending
display |
Opening and ending modes are performed after the ignition
key is turned on and off.
|
| Automatic
illumination control |
|
The brightness is adjusted automatically.
Auto dimmer mode and manual dimmer mode are available. When the
auto dimmer mode is selected, the brightness of display is adjusted
automatically depending on the outside light. The brightness can
be selected from 3stages.
When the manual dimmer mode is selected, the brightness of display
is fixed. The brightness can be selected from 5 stages.
|
| Special
display |
When a state with a speed of 0km/h or 0MPH continues
for more than 10 seconds, engine speed is displayed digitally.
|
| Warm-up
display (oil temperature or water temeprature) # |
Oil temperature or water temperature is displayed until
the temperature reaches the set value.
|
| Control
out # |
Signals of oil temperature or water temperature can
be output when it reaches the set value. It's possible to operate
a warning lamp or a motor when a temperature reaches the set value.
|
| Peak
display # |
Maximum values which sensors are connected are displayed.
If speed is recorded, the minimum value can be displayed.
|
| LINK
connectors for Defi-Link Meter # |
D.C.Unit(exclusive unit for Defi-Link Display VSD CONCEPT)
has 3 LINK connectors for Defi-Link Meters.
|
| EXAMPLES OF
DISPLAYS |
| When
the Defi-Link Display VSD CONCEPT is used WITHOUT the Defi-Link System |
Speed/Engine speed
|
Peak display
|
Special display
|
|
| When
the Defi-Link Display VSD CONCEPT is connected to the Defi-Link System |
Water temperature # /
Engine speed
|
Oil temperature # /
Engine speed
|
Oil pressure # /
Engine speed
|
Exhaust temperature # /
Engine speed
|
Fuel pressure # /
Engine speed
|
Speed/Oil pressure #
|
Speed/Fuel pressure #
|
Auto warning
|
Tacho warning
|
|
|
|
End
of Life Products |
