|
|
|
|
|
This installation manual is intended specifically for the After
Idle Timer. The company is not liable for any damages or injury
due to improper installation of the product, including failure to
follow the instructions provided herein and/or installation of the
product on vehicles other than those listed herein as compatible
with this product.
Prior to purchase, please refer to this manual to determine the
compatibility of the Boost V.S.D. unit with your vehicle.
Please read the entire installation manual prior to commencing
the installation process.
Please follow the instructions in this manual. The purpose of the
manual is to provide you with all the information that you need
to install the product.
In order to prevent an accident, which could result in personal
injury, death or damage to the product or vehicle, please give special
attention to the portions of this manual where the following symbols
are used .
Please read the manual carefully where the words " WARNING"
and " CAUTION" appear. Failure to do so may result in
damage to the product or vehicle or personal injury.
|
|
 |
indicates a risk of death or serious
injury. |
 |
indicates a risk of personal injury
or damage to equipment. |
 |
indicates the need to
confirm that a particular step has been correctly completed. |
|
|
|
|
 |
Do not stare at the gauges or manipulate the functions
of the control unit while driving. Distractions could lead to
an accident. |
|
NEVER dismantle or reassemble the product. This
could damage the product and make it unsafe to use. Tampering
with the product renders the limited warranty void. |
|
NEVER drive the vehicle while the timer is in
operation. If you drive the vehicle when the ignition key is
turned off, the steering wheel of the vehicle will lock. Distraction
could lead to a serious accident. |
|
NEVER use the After Idle Timer in a location where
there is not enough ventilation. The vehicle will exhaust carbon
monoxide and there is a danger. |
|
To prevent accidental movement of the vehicle,
move the gear shift lever to "Park(P)" or "Neutral(N),"
set the parking brake and turn the ignition key off, if your
vehicles is equipped with an automatic transmission. |
|
|
|
To prevent damage to the product, please adhere
to the following guidelines. |
|
Do not drop the product. |
|
Do not allow the product to be exposed to moisture. |
|
Do not pull on the product's wiring. |
|
This product is designed for use only
on vehicles with 12V electrical systems. NEVER install this
product on 24V vehicles. |
|
Before driving, make sure that the
ignition key is ON. |
|
This product cannot function if the
Boost V.S.D. is not used together. Please install Boost V.S.D.,
too. |
|
Please read the manuals of this product
and the Boost V.S.D. prior to the use of this product. |
|
|
|
After installation, if any of the fittings or
screws on the product come loose, please tighten them gently.
Using too much force when tightening screws may damage the product. |
|
|
|
|
|
To prevent damage and/or malfunction, please adhere
to the following guidelines.
*This product must be installed inside the vehicle. However,
do not attach this product to the instrument panel.
*This product must be installed with the proper gauge wires
obtained from auto parts or local hardware stores.
*Please confirm that you are using the correct gauge wires for
your vehicle model. Wiring is not available from the company
for the installation of this product.
*If your vehicle is Nissan with an automatic transmission system,
please use proper wires and a ignition lock relay adapter sold
by EFT Far East Co., Led. |
|
To prevent a malfunction, please adhere to the
following guidelines.
*Use electrical tape to completely insulate any wires that are
not in use.
*Prior to commencing installation of the After Idle Timer, disconnect
the negative(-) battery terminal. |
|
To prevent a malfunction, please adhere to the
following guidelines.
*Never connect the brake wire(blue) to the GND(ground) wire.
If these wires are cross connected, the timer will start unless
the parking brake is set.
*Never connect the GND(ground) wire to the ground wires from
a steering wheel or a brake systems.
*Do not attach wiring to the vehicle's body. |
|
Do not attach the control unit where it may impair
operation of the vehicle or obstruct the driver's view of the
vehicle or the road. |
|
Please read the manuals of this product
together with Boost V.S.D. prior to the wiring and the use of
this product. |
|
|
|
Prior to commencing installation of the Boost
V.S.D., make sure the vehicle ignition and headlights are OFF. |
|
After installation of the Boost V.S.D., make sure
to keep this manual for future reference.
|
| |
|
|
|
End
of Life Products |
