Defi Homepage
Home Club Defi Products Lineup Parts List Catalog Japanese Site
Contact Information Shops List Overseas Distributors
PRODUCTS
Defi-Link VSD X Defi-Link Meter BF Defi-Link Display Defi-Link Control Unit II  
Racer Gauge BF Tachometer Meter Hood & Option DIN-Gauge  
 
End of Life Products | Defi-Link Meter | VSD BASIS | VSD CONCEPT |
 
PIPE ARRANGEMENT FOR THE PRESSURE SENSOR
 
MAIN PRODUCT FEATURES
SAFETY WARNING
PARTS LIST
NAMES OF PARTS
AND WIRING
SPECIFICATIONS
HOW TO INSTALL
TROUBLE SHOOTING
HOW TO OPERATE
FAQ



This installation manual is intended specifically for the Boost V.S.D. The company is not liable for any damages or injury due to improper installation of the product, including failure to follow the instructions provided herein and/or installation of the product on vehicles other than those listed herein as compatible with the Boost V.S.D.

Prior to purchase, please refer to this manual to determine the compatibility of the Boost V.S.D. unit with your vehicle.

Please read the entire installation manual prior to commencing the installation process.

Please follow the instructions in this manual. The purpose of the manual is to provide you with all the information that you need to install the product.

In order to prevent an accident, which could result in personal injury, death or damage to the product or vehicle, please give special attention to the portions of this manual where the following symbols are used .

Please read the manual carefully where the words " WARNING" and " CAUTION" appear. Failure to do so may result in damage to the product or vehicle or personal injury.

 

indicates a risk of death or serious injury.
indicates a risk of personal injury or damage to equipment.
indicates the need to confirm that a particular step has been correctly completed.


Do not stare at the gauges or manipulate the functions of the control unit while driving. Distractions could lead to an accident.
NEVER dismantle or reassemble the product. This could damage the product and make it unsafe to use. Tampering with the product renders the limited warranty void.

To prevent damage to the product, please adhere to the following guidelines.
Do not drop the product.
Do not allow the product to be exposed to moisture.
Do not pull on the product's wiring.
This product is designed for use only on vehicles with 12V electrical systems. NEVER install this product on 24V vehicles.

After installation, if any of the fittings or screws on the product come loose, please tighten them gently. Using too much force when tightening screws may damage the product.

The instructions in this manual must be followed carefully when handling or installing the product.
Prior to commencing installation of the Boost V.S.D., make sure the vehicle ignition is OFF and remove the key from the ignition switch. Disconnect the negative( - ) battery terminal. Failure to follow these steps may result in a short circuit and/or fire causing damage to the product or vehicle or electrical shock and injury.
Use the solderless connectors provided with the kit to attach wires and insulate all connections. Failure to follow this step may result in a short circuit and/or fire.
To prevent a short circuit and/or fire, please adhere to the following guidelines.
*Use the electrical tape to completely insulate any wires that are not in use.
*Prior to commencing installation of the Boost V.S.D., disconnect the negative(-) battery terminal.
To prevent malfunction, please adhere to the following guidelines.
*Never connect the GND(ground) wire to the ground wires from a setting wheel or a brake systems.
*Do not attach wiring to the vehicle's body.
To prevent malfunctioning, this product must be installed inside the vehicle.
Do not attach the control unit on the instrument panels.
Do not attach the display unit where it may obstruct driver's visibility.
Attach the sensor when the engine is cold. It is feared that you will get burned if you install the sensor when the engine is hot.

This product is designed for use only on vehicles with 12V electrical systems. NEVER install the V.S.D.II on 24V vehicles.
Do not use wires other than the wires included with the product. If the wiring provided is insufficient, please purchase more wire of the same quality and gauge.
Completely insulate any unused wires with electrical tape. If wires or connectors loosen or disconnect during installation, please make sure that they are correctly reattached.
Do not install the control unit where it may be exposed to moisture, dust, or direct sunlight. Do not place the product directly in front of or near the vehicle's heater vents.
If the negative( - ) battery terminal is disconnected, data stored in other electronic instruments in the vehicle, such as clocks or radios, may be lost. Please remember to reset equipment according to the original manufacturer's manuals after installation of the product.

Prior to commencing installation of the Boost V.S.D., make sure the vehicle ignition and headlights are OFF.
After installation of the Boost V.S.D., make sure to keep this manual for future reference.