 |
Stepping motor "STS26A"
Maximum angle of deflective 270 degrees (full sweep) is controlled
by the microcomputer up to 4600 division (0.057degrees each)
to provide high precision in the accuracy of information generated.
The stepping motor is sufficient for quick response of all sorts
of professional motorsports. |
| |
The scale is compressed to acquire great visibility
and ease of use.
*Wide-angle scale is used at the idling range 0~3,000RPM.
*The scale is fitted to recent engine power band and linear
scale is used from 3,000RPM to 11,000RPM.
 |
|
LED illumination
The gauge dial is invisible while the ignition switch is off.
Once the ignition switch is turned on, a clear display appears
by colored LED illumination. The gauge dial illumination and
the red emitting needle pointer provide high visibility. |
|
Opening and closing modes
The gauge dial and the needle pointer performs opening and closing
modes interlocked with turning ON/OFF of the ignition. Refer
to the movie of Defi-Link Meter
BFs.
 |
|
Adjustable brightness
There are 5 stages of brightness for the daytime and 6 stages
for the nighttime. The brightness can be decreased/increased
with the vehicle lights switched on/off. |
|
Dual warnings of light and buzzer
Two customer-defined warning RPMs can be set. When the RPMs
are exceeded, the warning LED blinks/lights up and the warning
buzzer sounds.
 |
|
Exclusive large-sized indicator
The exclusive large-sized indicator which lights in green and
red enhances the visibility of warnings in addition to the warning
LED in the gauge.
|
|
Peak memory function
The maximum RPM during driving can be stored and checked later.
 |
|
Detachable switch unit
The large-sized switch unit with light is fixable on the gauge
and is also detachable.
 
 |
|
Exclusive mounting band and back case
The gauge is clinched by using the exclusive mounting band
and back case. Wires can be stored in the back case neatly.
|
|
Integrated rev adapter
By having the Defi rev adapter built-in, the tachometer works
on vehicles with DIS (Distributor-less Ignition System) which
engine speed signals cannot be picked up due to connection
vehicle control units with serial communication.
|
|
Gauge dials are invisible while the ignition
switch is off. Once the ignition switch is turned on, a clear
display appears with white LED illumination. A red emitting
needle pointer increases visibility.
|
|
|
|
Ignition off
|
Ignition on
(Amber Red Model)
|
|
|
The illumination color can be chosen from white,
amber red, and blue.
*The illumination color cannot be changed.
*Blue models are NOT available in USA. Instead of BF blue models,
Blue Racer
Gauges are available in USA. |
|
Regular Position
Bezel for 80mm (3 1/8") gauge is included in the product. |
 |
Defi-Link Meter BF is applicable only
for 12V vehicles. |
End
of Life Products |
BF
Tachometer is a standalone tachometer which consists of a gauge,
a switch unit, and a big warning indicator. BF Tachometer is not
necessary to be connected to a control unit.
