|
|
| HOW TO OPERATE |
(A)Setting mode
(B)Speedometer and Tachometer mode
(C)Special display mode
(D)Maximum speed mode
(E)Illumination control function
(F)Power off mode
|
| (A)Setting
mode |
ing the product, you will need to set the product modes
to correspond to the specifications of your vehicle.
 |
 |
Be sure to make proper settings.
The unit will not operate properly without proper settings. |
|
Set up while the engine is on and the vehicle
is stopped. |
|
|
ITEM
|
DISPLAY
|
SETTING RANGE
|
UNIT OF DISPLAY
|
FACTORY SETTING
|
| 1)Speedometer Units |
Km/h
|
MPH, km/h
|
MPH, km/h
|
Km/h
|
| 2)Speedometer Pulse Type |
67P
|
2 to 275 pulse/second
at 60km/h or 40MPH
|
-
|
67pulse/second
|
| 3)Number of Cylinders |
E - 4
|
3, 4, 5, 6, 8 (Cylinders)
|
-
|
4(Cylinders)
|
| 4)LED Display |
LED
|
LED ON, OFF
|
-
|
LED(ON)
|
| 5)Special Display |
SPEC
|
Special Display ON, OFF
|
-
|
LED(ON)
|
| 6)LED Speedometer Step Value |
S - 20
|
10, 20(MPH)
10,20,30,40(km/h)
|
MPH or km/h
|
20(km/h)
|
7)LED Tachometer Step Value
|
1000
|
200 to 1000(r/min)
(in units of 200)
|
r/min
|
1000(r/min)
|
| 8)LED MAX. Tachometer Value |
7000
|
1000 to 9900(r/min)
(in units of 100)
|
r/min MAX
|
7000(r/min)
|
The mode changes each time the SET switch is pressed
less than 2 seconds.
|
|
|
|
|
|
|
|
| 8)LED Tachometer MAX.Value |
|
|
|
|
|
|
|
| 7)LED Tachometer Step Value |
|
|
|
|
|
|
|
| 6)LED Speedometer Step Value |
|
|
|
|
|
1)Setting the Speedometer units of measure
Press the SET switch once, and use the UP and DOWN switch to
set the desired units of measure.
 |
|
2)Setting Speedometer Pulse Type
-1. Press the SET switch once. "67P" appears on the
display. And then press and hold the UP switch for more than
2 seconds. "P" blinks.
-2. Press the UP switch once while the vehicle is moving at
40MPH or 60km/h. If the setting is failed, the correct speed
is not displayed. If the display of VSD BASIS and the vehicle's
equipped speedometer are different, press and hold the UP switch
for more than 2 seconds. The speed pulse can be reset.
*Ask fellow passengers to set up. Do not set up at the wheel.
*It may be unable to be adapted for some models of vehicle. |
|
3)Setting the Number of Cylinders
Press the SET switch once, and use the UP and DOWN switch to
set the number of cylinders.
|
|
4) Setting the LED Display
Press the SET switch once, and use the UP and DOWN switch to
set the LED Display ON or OFF.
 |
|
5) Setting the Special Display
Press the SET switch once, and use the UP and DOWN switch to
set the Special Display ON or OFF.
|
|
6) Setting the LED Speedometer Step Value
Press the SET switch once, and use the UP and DOWN switch to
set the Speedometer Step Value.
|
|
7) Setting the LED Tachometer Step Value
Press the SET switch once, and use the UP and DOWN switch to
set the LED Tachometer Step Value.
 |
|
8) Setting the LED Tachometer Maximum Value
Press the SET switch once, and use the UP and DOWN switch to
set the Tachometer Max.Value.
 |
|
If the SET switch is pressed once, the system will return to SPEEDOMETER
units setting. In any set mode, the system will return to NORMAL MODE.
If the SET switch is pressed for more than 2 seconds.
If the engine revolutions exceed the set Tachometer MAX. Value, all
the LED lamps will flash. If the engine revolutions drop below the
set Tachometer MAX. Value, the LED lamps will go out gradually, counting
backward to the set Tachometer MAX. Value.
<EXAMPLE> If the Tachometer MAX Value is set to 7400 r/min and
Tachometer Step Value is set to 400 r/min, the LED lamps will appear
as indicated below at the specified engine revolution rates noted.
|
 :
LED ON |
 :
LED OFF |
| Revolutions(r/min) |
LED State |
Revolutions(r/min) |
LED State |
| 0 to 4900 |
|
6200 to 6500 |
  |
| 5000 to 5300 |
|
6600 to 6900 |
|
| 5400 to 5700 |
|
7000 to 7300 |
|
| 5800 to 6100 |
|
7400 to 9900 |
|
|
| |
| (B)SPEEDOMETER
& TACHOMETER (SP & TA) MODE |
When the MODE/POWER switch is pressed once, the display mode will
be changed after mode indicator(F-No.) is displayed for one second.
0 to 400 km/h
(1km/h increments) |
0 to 240 MPH
(1MPH increments) |
0 to 9900 r/min
(100r/min increments)
|
|
MODE
|
DIGITAL DISPLAY
|
LED BAR DISPLAY
|
EXAMPLE DISPLAY
|
|
F-1
|
Speedometer:
0 to 240MPH (1MPH increments)
0 to 400km/h (1km/h increments)
|
Speedometer:
LED lamps switch on as each step value is reached. All lights
are OFF at zero speed. |
|
|
F-2
|
Speedometer:
0 to 240MPH (1MPH increments)
0 to 400km/h (1km/h increments) |
Tachometer:
LED lamps switch on as each step value is reached. Seven lights
are ON at MAX value. |
|
|
F-3
|
Tachometer:
0 to 9,900 rpm
(100rpm increments) |
Speedometer:
LED lamps switch on as each step value is reached. All lights
are OFF at zero speed. |
|
|
F-4
|
Tachometer:
0 to 9,900 rpm
(100rpm increments) |
Tachometer:
LED lamps switch on as each step value is reached. Seven lights
are ON at MAX value. |
|
|
|
|
| (C)SPECIAL
DISPLAY MODE |
If the vehicle speed is zero for more than 10 seconds while in speedometer
and tachometer mode, the LED will enter the special display mode.
|
| (D)MAX SPEED
DISPLAY MODE |
 If
the UP/MAX switch is pressed while in speedometer and tachometer mode,
the latest recorded maximum speed will be displayed for 3 seconds
and the system will then return to speedometer and tachometer mode.
If the UP/MAX switch is pressed for more than 2 seconds while displaying
the MAX speed, the current MAX speed is cleared. 0(zero) is displayed
for 3 seconds and the system will then return to speedometer and tachometer
mode.
|
| (E)DISPLAY
BRIGHTNESS ADJUSTMENT MODE |
The level of display brightness in any mode changes each time the
DOWN/DIM switch is pressed.
|
| (F)POWER
OFF MODE |
If MODE/POWER switch is pressed for more than 2 seconds while in
any mode, all displays will turn OFF. If the MODE/POWER switch is
pressed again, the system will turn on to the last display mode.
|
Please note that Section 25269 of the California Vehicle Code
provides that " no person shall display a steady burning
red warning light on a vehicle," except as may otherwise
be provided herein. The exceptions permitting red lights apply
to emergency vehicles and other situations that are not be applicable
to the V.S.D. instruments. Other states have similar prohibitions
in their respective vehicle codes.
Note that the V.S.D. display unit projects light upwards upon
the transparent screen, so that the image can be reflected into
the driver's line of sight. In some situations, it is possible
that the light from the LEDs of the display unit may be visible
to a person located in front of the vehicle, either because
the angle at which the display unit is mounted on the dashboard
or because the angle of the dashboard is inclined towards the
front of the vehicle.
If this is the case, the applicable regulatory authorities might
interpret the use of the V.S.D. display unit to be a violation
of California Vehicle Code Section 25269 or other state vehicle
codes. |
|
|
|
|
End
of Life Products |
